![]() If you have any questions about hitch settings or John Deere tractors, you can contact your local John Deere dealer. To activate float mode, press the hitch control lever full forward, then downward, locking it into the float position. It allows the hitch to raise and lower with minimal resistance to allow the implement to follow the contour of the ground. ![]() Float mode is intended to be used with implements that are self-supporting with gauge wheels. Slip sensitivity can be deactivated by changing slip sensitivity settings to zero. It is then lowered back to the set position once wheel slip has decreased. The implement will be raised if wheel slip is increased above your desired setting. Without one or both, slip sensitivity will be unavailable or grayed out on the display monitor. It is a technology that has been around since the 70s. Quadrafire, Blaze King and others come to mind. They use a mechanical control that opens and closes the air supply as the bi-metallic coil heats and cools. Draft Control with Slip Sensitivity requires low depth to be activated and a functional ground radar. Some stoves do have automatic air control. While traveling at your desired depth and ground speed, depress the hitch button – this records the hitch depth set position. Lower the implement into the ground using the hitch control lever or depth adjust dial to achieve your desired depth. To activate Draft Control mode, first adjust the slope depth setting to somewhere between 1 and 5 – the help page in the Operations Center will provide suggestions for different types of implements. Draft Control automatically lowers and raises the implement in rolling terrain to keep draft loads or implement loads consistent. Depress the set button to save the hitch depth’s set position. From here, you can adjust the hitch position using either the hitch control lever or depth adjust dial. Change both load depth and slip sensitivity settings to zero. To activate this mode, navigate to the hitch page in the Operations Center by depressing the hitch button on the navigation bar. ![]() Position mode lowers the hitch to a set position and keeps it at that position, regardless of draft loads. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |